LONDON – The temporary disruption at London’s Luton Airport on Monday (July 18) when soaring temperatures caused a small section of the asphalt to lift is an example of the challenges airports face in making their infrastructure resilient to climate change, experts say.
Below is an explanation of how global airports are coping with extreme heat and what may be needed to prevent future interruption if there is another heatwave.
What happened at Luton and why?
The Luton runway was closed for nearly two hours on Monday, prompting airlines to delay or divert flights as temperatures rose above 37 deg C, adding to industry headaches in what has been a chaotic summer travel season in Europe.
A long-standing patch repair to a small section of the runway – the equivalent of 0.2 per cent of the entire surface area – became so hot that it de-bonded and began to lift, a spokesman for the airport said on Friday (July 22), adding it was repaired within two hours.
It is built to the same specification as others in Britain, meeting industry safety standards and regulations, the spokesman said. “We continue to evaluate all options regarding the ongoing maintenance and long-term resilience of all of our infrastructure.”
The spokesman did not comment on questions about the timing of the runway’s resurfacing, the type of asphalt used or any possible changes to the material.
Runways are typically resurfaced every 10 to 15 years.
Experts say the airport, one of Britain’s busiest and used by budget airlines including Ryanair and EasyJet, may be more vulnerable to heat because it is at a higher elevation than the others surrounding the capital: Heathrow, Gatwick and Stansted.
Luton’s climate change adaptation report released in November 2021 warned one of the key risks was high temperatures causing infrastructure damage or impacting operations.
The airport said in the medium term it would need to ensure all airfield resurfacing projects considered the impact of increasing temperatures.
How do other airports cope with extreme heat?
The surface materials used depend on the climate and local conditions as well as other factors such as cost.
In the Middle East, airports are more likely to use more expensive concrete runways because they are good at withstanding extreme heat, Greg White, director of the Airport Pavement Research Program at Australia’s University of the Sunshine Coast, said this week.
In Britain and Australia, cheaper asphalt runways are more common, he said, though they use different stiffness levels depending on the local climate.
That means in Australia, where summer temperatures of 40 deg C are not unprecedented, asphalt runways do not melt like they did at Luton.
“This would only happen in Australia if Australia got to 50 deg C,” White said. “You need something that’s outside of the norm. But it can happen at the cold end as well. You’ll get different failures, but it can happen in extreme cold if you’ve got something that’s been engineered and designed for much warmer weather.”
Luton could make its runway more resistant to a high temperature, but that would in turn make it more susceptible to an extremely low temperature, White said.
What are the other challenges for airports?
Airports Council International (ACI), a group representing airports globally, said it will soon publish an airfield maintenance handbook for members with a section dedicated to pavement management.
“This includes lists of probable cause of pavement distresses, and some are related to climate,” an ACI spokesman said.
Runway patches are only one of the potential challenges faced by airports as temperatures rise, with others including airplanes requiring longer take-off distances and weight restrictions in hotter conditions.
As temperatures get warmer, aeroplanes need a longer time and more fuel to take off, because hot air is thinner.
A Federal Aviation Administration study issued in November 2021 showed runways at eight or nine of the 30 busiest US airports might need to be extended by at least 152m due to future increases in temperature or higher rainfall, which requires more braking distance.
Rising sea levels and more powerful storms mean many airport operators are also investing in measures such as higher runways, seawalls and better drainage systems to future-proof their immovable assets.
This article was first published in Asia One . All contents and images are copyright to their respective owners and sources.
